In device manager, if you found the PCI devices changes to PCI Simple Communications Controller and with a yellow exclamation mark, it means that your PCI Simple Communications Controller driver is missing and your PCI device cannot be recognized by Windows 10.
Driver for PCI Simple Communications Controller for 32 bit Gateway MX 3210 I installed a new hard drive in a Gateway MX 3210, 32 bit and installed Windows 7. The device manager shows I am missing the driver for the PCI Simple Communications Controller so first I went to Gateway support with no luck, then tried several other sites, again with no.
Contents:
What is PCI Simple Communications Controller?
PCI is short for Peripheral Component Interconnect, it is used to connect the devices to computer. A PCI device is plugged into the PCI slot on the motherboard. The network card is a typical PCI slot device.
- Note: PCI Simple Communications Controller is a generic label that Windows gives to PCI boards installed in a PC when the Drivers for the device are not installed. Cause of PCI simple communications controller Driver error.
- Use the links on this page to download the latest version of PCI Simple Communications Controller drivers. All drivers available for download have been scanned by antivirus program.
PCI Simple Communications Controllers missing is lack of the Intel Management Engine interface drivers. Normally it happens after you upgrade the system from Windows 7, 8 to Windows 10, all the devices and drivers are installed correctly, but maybe this one cannot installed.
So try to download and update Intel management engine driver for Windows 10, 8, 7 to fix PCI simple communications controllers device driver missing problem.
There are 3 ways you can download and update the IME (Intel Management Engine) driver.
Solution 1: Update PCI Simple Communications Controllers Driver by Device Manager
Using device manager to update the IME driver will be an easy way, you can try it at first. If you have already tried it, you can goes to solution 2 and solution 3 directly.
1. Open Device Manager.
2. Expand Other Devices and find the PCI Simple Communications Controller.
3. Right-click it and choose Update Driver.
4. Choose the first option: Search automatically for updated driver software.
After that, Windows will search PCI devices drivers online and update it automatically.
If this driver can find by Windows, you have already fixed it. If Windows remind that, you have already installed the latest version PCI Simple Communications Controller but the problem still exist, follow the below solutions.
Solution 2: Update PCI Simple Communications Controller Automatically
Updating PCI Simple Communications Controller driver in automatically way will be the best choice. It will save you more time in the whole process of finding the missing driver, downloading and installing the driver. More additional, if you have less knowledge about the PCI devices and IME, all the process will takes more time.
You can use Driver Booster to help you. Driver Booster can scan all computer hardware devices such as chipset, motherboard and its slots, find the missing and outdated drivers. Then provide the right and latest version of drivers for the computer. Using this way, you can download and update PCI Simple Communications Controller drivers for Windows 10, 8.1, 7 easily and fast.
Download Driver Booster, install and run it on your computer.
1. Scan. The first step will help you detect the disappearing PCI Simple Communications Controller driver.
2. Find the Intel Management Engine and click Update.
And if you are not sure what driver you should to update, you can update all the drivers in one time.
Solution 3: Download and Update Intel Management Engine Drivers Manually
The Intel Management Engine driver will cause this error. So updating the Intel Management Engine driver can fixes the driver error perfect. But the manually way will be some complex, so be some patience. Of course, you can goes to solution 2 to use the automatic way.
Pci Simple Communications Driver Windows 7
1. Goes to this page: Intel Management Engine Drivers.
In the official download page, you will find an additional note:
It means this error is caused by the incorrect Intel ME driver.
2. Here you can download the ME_Corporate_Win7_8.1_10_11.0.0.1194.zip file. This file supports all the 32 bit & 64 bit Windows 10, 8.1, 7.
Pci Simple Communications Controller Driver Windows 7 Gateway Windows 10
3. Unzip the ME_Corporate_Win7_8.1_10_11.0.0.1194.zip. And there are 3 folders you can find: ME_SW_MSI, MEI-Only Installer MSI, and WINDOWSDriverPackages.
4. Open the first folder ME_SW_MSI and click SetupME.exe to start install the Intel Management Engine driver.
Follow the installation to install it.
5. After the Intel ME driver installed, you should restart your computer because the chipset-based driver need to reboot to take effect.
And then you can goes to device manager, the PCI Simple Communication Controller disappears, it means the right PCI Simple Communications Controller drivers is installed. So it worked.
Note for Windows 7:
If it is the Windows 7 PCI Simple Communications Controllers driver missing, you need to install a Kernel-Mode Driver Framework 1.11 (KB 2685811) at first, and you can download it from this page.
Easier Way for Windows 7:
If you are using Windows 7, and don’t want to install the framework, you can also download this file: MEI_ALLOS_6.1.0.142_PV.exe. After that, you can double-click to install it directly.
The MEI_ALLOS_6.1.0.142_PV.exe is an Intel Management Engine driver for 5 series chipset-based desktop boards. And it can fully supports Windows 7, Vista and XP 32 bit and 64 bit.
Follow these steps, the Intel Management Engine will installed successfully. And it will fix PCI Simple Communications Controller not recognized error.
Related Articles:
PCI Driver Errors
A PCI Simple Communications Controller Driver XP Error is an indication that a peripheral device attached to the PCI slot in your computer is not working properly.
The system may not display a message telling you about the PCI Simple Communication Controller Driver XP Error but may display a message that points towards a problem with the device attached to the PCI slot.
Below are a few PCI Simple Communications Controller errors and simple ways to resolve them.
Solution for Error Code 28 – PCI Simple Communications Controller
If the device in the PCI slot has stopped working, you can find out more about the problem by looking at the PCI Devices in the Device Manager window.
You may see a yellow exclamation mark near the PCI simple communications controller icon. The error is generated by the system because of a broken path of the Driver file.
To resolve the issue, you will be required to manually update the PCI Simple Communications Controller Driver by following the steps below:
- Click on Start -> Control Panel -> System
- Go to Hardware Tab and click on Device Manager
- Under “Other Devices”, right- click on “PCI Simple Communications Controller” and select Properties
- Click on Driver Tab
- Click on Update Driver and follow the instructions
Note: You are provided with two options – “Search automatically for the Driver software” or “Browse your computer for Driver software”
If you have a motherboard CD, insert it in the CD tray and let the system install the required PCI Simple Communications Controller driver automatically.
Solution to Error – “The device is not configured properly. (Code 1). There is no driver selected for the device information set or element.”
This error is generally related to PCI-E Ethernet NIC Driver which prevents your system from connecting to the Internet. Corrupt or missing drivers are the most common cause for this error.
Pci Simple Communications Controller Driver Windows 10
Follow the steps below to fix this issue
Pci Simple Communications Driver Windows 7 32
- Click on Start -> Control Panel -> System
- Go to Hardware Tab and click Device Manager
- Go to Network Adapters and right-click Ethernet and go to properties
- Go to Driver Tab and click Driver Details
- In Driver Files Details window, you can see the Driver files with a red or green check in front of the Driver file.
- Close the window and go to Ethernet and uninstall the device.
- Go to Network Adapters, right-click it and select “Scan for hardware changes”
Gateway Pci Simple Communications Controller Driver Windows 7 Download
Your system will look for devices that do not have Drivers installed. Insert the motherboard CD or Device Driver CD and let the system install the Drivers for the PCI Ethernet Controller.